Antennas - Iridium

Image

Tuff-Tenna

Rugged passive Iridium antenna suitable for land or marine use.  Particularly popular with off-roaders and smaller vessels.

RST520 – Active Transmitter / Receiver Iridium antenna with DC regulator

The RST520 active Iridium antenna can easily support up to 55m of LMR400 cable and longer cable runs can be supported with thicker cable runs. Designed for harsh environments, the RST520 consists of two RHCP dipole antennae housed within 4mm thick GRP radomes mounted on a common base. One antenna is for signal transmission and one for reception. A linear power amplifier within the base and connected to the transmitting antenna compensates for signal loss incurred mainly by the connecting cable. Similarly, a low noise amplifier is attached to the receiving antenna via a low loss interdigital filter to boost the signal sent to the telephone. The interdigital filter has a bandwidth of 12 MHz centred on the Iridium band designed to attenuate any out of band interference that may arise, for example from nearby Inmarsat uplinks.

RST710 – Iridium antenna - Pole / Mast Mount with U Bolts / Pipe

Iridium antenna designed for Maritime based applications. Designed to work with Beam Communication and will work with other Iridium based devices. Antenna cable connection is inside the antenna and protected from the environments.

RST714 – Iridium Antenna – WHIP style including 5m antenna cable

Iridium antenna designed for Land based applications. Designed to work with Beam Communication and will work with other Iridium based devices.

The antenna is very good for 4WD / RUV and Truck applications where a ruggered antenna giving the highest possible clearance of the roof line is required and can be easily be fitted to the bull bar of a vehicle. 5m of antenna cable is included and attached to the antenna.

RST715 – Iridium antenna – Magnetic mount with 5m antenna cable

Iridium antenna designed for Land based applications. Designed to work with Beam Communication and will work with other Iridium based devices. Antenna cable is included and attached to the antenna. The antenna also allows for easy removal and re fit.

RST719 – Iridium Aeronautical antenna – Bulkhead Patch (TSO Approved)

Iridium antenna designed for Aeronautical based applications. Designed to work with Beam Communication and will work with other Iridium based devices. The antenna is designed to be low profile and is TSO approved C - 144.

RST720 – Iridium Bolt Mount antenna – with 5m cable (right angle)

Iridium antenna designed for Land based applications. Designed to work with Beam Communication and will work with other Iridium based devices. Antenna cable is included and attached to the antenna.

RST965 – Iridium antenna – Portable Auxiliary with 1.5m cable

Iridium antenna designed for the Motorola / Iridium 9500 / 9505 & 9505A for occasional vehicle use. Small and lightweight, it’s easy to remove and re fit via its Magnet inside the antenna. Comes complete with 1.5m of cable.

Antennas - GPS

Image

RST700 – Active GPS with Pipe

GPS Active antenna designed for maritime applications. Antenna is supplied with PVC pipe, 30cm (11.8inches). Antenna cable connection is not exposed to the weather. Designed to work with Beam tracking products like LeoTRAK and can work with other GPS based devices.

RST701 – Active GPS Bulkhead Patch Antenna

GPS Active antenna designed for Vehicle and Land based applications. Designed to work with Beam tracking products like LeoTRAK and can work with other GPS based devices.

Antennas - Dule Mode GPS/Iridium

Image

RST702 – Dual Mode Iridium / GPS Antenna – Marine with Pipe

Iridium and GPS Active antenna designed for maritime applications. Antenna is supplied with PVC pipe , 30cm (11.8inches). Antenna cable connection is not exposed to the weather. Designed to work with Beam tracking products like LeoTRAK and can work with other Iridium / GPS based devices.

RST703 – Dual mode Iridium / GPS antenna - Patch

Iridium and GPS Active antenna designed for Vehicle / Land based applications. Designed to work with Beam tracking products like LeoTRAK and can work with other Iridium / GPS based devices. Designed to be very low profile.

RST704 – Dual mode Iridium / GPS antenna – Aero (TSO Approved)

Iridium and GPS Active antenna designed for Aeronautical based applications. Designed to work with Beam tracking products like LeoTRAK and can work with other Iridium / GPS based devices. Designed to be very low profile & TSO approval C-144.

RST705 – Iridium / GPS Antenna – MAG mount including 6m antenna cable

Iridium and GPS Active antenna designed for Vehicle / Land based applications. Designed to work with Beam tracking products like LeoTRAK and can work with other Iridium / GPS based devices. The antenna is designed to be very low profile.

With the Magnetic mount, the antenna is very easy to install and move from asset to asset and doesn’t require any holes to be drilled for fitting.

Included is 6m of both Iridium & GPS antenna cable, making the RST705 a very cost effective solution.